Guide
Skip hire for a bathroom renovation
A bathroom is a small room that produces heavy waste, so the trap is sizing up when you should size down. Here is how to get it right.
The short answer
A 2 yard mini skip suits a straightforward bathroom strip-out, and a 4 yard midi skip a larger bathroom or one with a lot of tiling. Because tiles, ceramics and old suites are heavy, a smaller skip is usually the better value, since the weight limit arrives before the space runs out.
What a bathroom refit produces
A small room, heavy waste
A bathroom strip-out gives you the old suite, wall and floor tiles, flooring, and the timber and plasterboard behind them. It is not a large volume, but it is dense: ceramics, tiles and a cast or steel bath are heavy for their size. That combination, small volume but high weight, is the opposite of a house clearance, and it changes how you size the skip.
The mistake is to book a big skip because it feels like a big job. With heavy bathroom waste you reach the weight limit long before you fill a large skip, so you would be paying for space you cannot use. A smaller skip, filled properly, is almost always the right call.
The strip-out
What comes out, and in what order
A bathroom strip-out usually runs suite first, then tiles, then flooring and any boarding behind. The heaviest items, the bath, the tiles and the old floor, tend to come last and all at once, which is when the skip fills by weight. Loading them level and low, rather than tipping everything into one end, keeps the skip within its limit and safe to collect.
It is worth protecting the route out too. Bathroom waste is sharp and heavy, so a covered path from the bathroom to the skip saves your floors and keeps broken ceramic off the drive.
Choosing a size
The right skip for a bathroom
Heavy waste, so size down rather than up.
A standard bathroom strip-out.
A large bathroom, or a lot of tiling and flooring.
To weigh up the options.
Watch for
Two things to know
- Weight. Tiles, ceramics and old suites are dense, so keep the load level and spread across the base, and do not fill above the top edge.
- Plasterboard. Kept separate from general skip waste at most sites, so keep it in its own pile and tell us the amount.
Related
Useful next steps
For plasterboard and the full list.
More on sizing for heavy waste.
To see prices for your area.
Common questions
Frequently asked
What size skip do I need for a bathroom renovation?
A 2 yard mini skip for a standard bathroom strip-out, or a 4 yard midi skip for a large bathroom or a lot of tiling. Because bathroom waste is heavy, a smaller skip is usually the better value. Compare on our skip sizes hub.
Why not a bigger skip for a bathroom?
Bathroom waste is dense, so you reach the skip weight limit before you fill a large one, meaning you would pay for space you cannot use. A smaller skip, filled level, is almost always the better choice for heavy waste.
Can I put tiles and an old bath in a skip?
Yes. Tiles, ceramics and old suites all go in a skip. They are heavy, so keep the load level and spread across the base, and mind the weight limit if the load is mostly tiles.
Can I put plasterboard in a bathroom skip?
Not mixed with general waste. Plasterboard is kept separate at most sites, so keep it in its own pile and tell us roughly how much there is.
How much does a skip for a bathroom cost?
It depends on the size and your postcode. See prices for your area on our skip prices page, or get a quote and we will confirm before you book.
Get in touch
Get a quote
Tell us your postcode, the size you need and your preferred date. We confirm your price before you book.
Prefer to call? We’re available Mon–Fri, 7:30am–5:30pm
0333 880 0095
or fill in the form below